CALL US

+(91) 022 66310022

Alloy Steel Pipe

High Performance Low Alloy Steel Seamless pipe Supplier in India.

Alloys are usually classified into austenitic and ferritic. Ferritic alloy pipes are well known for low carbon content and high chromium content. These Alloy Steel pipes are said to be magnetic and display good ductility, resistance to corrosion, and resistance to stress-related corrosion. These Alloy Steel Seamless Pipes are widely used in kitchen ware, automotive and industrial pieces of equipment. High temperature boiler pipes are used in applications where the temperature rises above 500 degrees C. These High temperature alloy steel pipe resist pressure difference that is observed inside and outside of these pipes while they are being used in drill rigs. Also check weight, schedule chart and price per ton of one of the oldest Alloy Steel Pipe Suppliers in India.

Alloy Steel Pipe

ASTM A335 Chrome Moly Pipe

Alloy Steel Seamless Pipe

One of the advantages of using Alloy Steel ERW Pipe is that the material possesses an accurate and clean surface. They are used for engineering purposes, fencing, as well as scaffolding. ASTM A335 Pipe has lower content carbon which helps it from being vulnerable to graphitization and intergranular corrosion. Applications that require high precision for installation and accuracy in operational application these Alloy Steel Welded Pipes are used. They are available in low strength and high strength with good resistance to corrosion. The size of these Seamless Alloy Steel Pipe varies between ⅛ inches to 60 inches depending upon the standard that governs them.

Manufacturer of ASTM A335 Chrome Moly Welded Pipe in Mumbai, Get AS Gas Pipe Schedule Chart.

Boiler pipe suppliers recommend the use of these products in the chemical, petrochemical, and energy-related industries. Boiler pipe material helps in making these pipes resistant to impact and stress along with making them strong. By the reduction of seawater atomic hydrogen is generated on the surface of Seamless ferritic alloy-steel pipe. This is the reason they display excellent better wear resistance, hardenability, improved weldability, and ductility. These Alloy galvanized pipes are used in high-temperature heater tubes, low-temperature cryogenic applications, and high-pressure steam headers.

We at Reliant Pipes & Tubes Pvt. Ltd. are Alloy Steel Pipe suppliers that manufacture and supply these pipes as per international standards. Our produce is made up of superior quality raw material and with utmost precision. We are well known for affordable Alloy Pipe Prices with outstanding quality. Our timely delivery and flawless product have made us one of the most reputed and renowned Alloy Steel pipe manufacturers in India.

Alloy Steel Pipe

Welded Alloy Steel Pipe Specifications

Specifications ASTM A335 / SA335
Sizes 5.0 milimeter - 1219.2 milimeter
Form “U” Shape, Square, Pan Cake Coils, Coiled, Rectangular, Round, Hydraulic Tubes.
Standard ASME, AISI, EN, ASTM, GB, JIS, DIN
Schedule Thickness Ranges SCH XS, SCH 40, SCH 80S, SCH 5, SCH 80, SCH XXS, SCH 160, SCH10, All Schedules
Specialized in Heavy Duty Alloy Steel Drill Pipes, Alloy Steel Pipes Clamp Suppliers
O.D. Sizes up to 12 inch NB, 6.00 mm Other Dia. upto 250 mm Other Dia.
Thickness 0.3 – 50 mm thick
Type Welded | CDW | ERW | DOM | Seamless | Fabricated | CEW
Length Single Random, Double Random, Cut to length
End Screwed, Beveled, Threaded, Plain
Finish Annealed & Pickled, Polished, Bright & Annealed, etc
Check our ready stock in Montreal, Perth, Bengaluru, Ernakulam, Howrah, Lagos, New Delhi, Santiago, Kanpur, Riyadh, Dammam, Nagpur, Hyderabad, Jamshedpur, Gurgaon, Ludhiana, Calgary, Mumbai, Sydney, Caracas, Abu Dhabi, Ankara, Mexico, Courbevoie, Coimbatore, Tau, Karachi, Ahvaz, Kuwait, Surat, Ahmedabad, Gimhae si, Ranchi, Melbourne, Khobar, Noida, Baroda, Kolkata, Bogota, Ludhiana, London, Janeiro, Chennai, Gujarat, Indore, Thiruvananthapuram, Port of Spain, Bangalore, Istanbul, India, Rajkot, Pimpri Chinchwad, Vadodara, Muscat, Tehran, Manama.

Call us for AS boiler pipe, Chrome Alloy Pipe Price List, Exporter of High Temperature Alloy Steel ERW Pipe.

Size Table of Alloy Steel Welded Pipe

NB Size OD 40S 5S 10S S10 S20 S40 S60 XS/80S S80 S100 S120 S140 S160 XXS
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
1/8" 10.29 1.2 1.73 2.41
1/4" 13.72 1.7 2.24 3.02
3/8" 17.15 1.7 2.31 3.2
15 1/2" 21.34 2.8 1.7 2.1 2.77 3.73 3.73 4.78 7.47
20 3/4" 26.67 2.9 1.7 2.1 2.87 3.91 3.91 5.56 7.82
25 1" 33.4 3.4 1.7 2.8 3.38 4.55 4.55 6.35 9.09
32 1 1/4" 42.16 3.6 1.7 2.8 3.56 4.85 4.85 6.35 9.7
40 1 1/2" 48.26 3.7 1.7 2.8 3.68 5.08 5.08 7.14 10.2
50 2" 60.33 3.9 1.7 2.8 3.91 5.54 5.54 9.74 11.1
65 2 1/2" 73.03 5.2 2.1 3.1 5.16 7.01 7.01 9.53 14
80 3" 88.9 5.5 2.1 3.1 5.49 7.62 7.62 11.1 15.2
90 3 1/2" 101.6 5.7 2.1 3.1 5.74 8.08 8.08
100 4" 114.3 6 2.1 3.1 6.02 8.56 8.56 11.1 13.5 17.1
125 5" 141.3 6.6 2.8 3.4 6.55 9.53 9.53 12.7 15.9 19.1
150 6" 168.3 7.1 2.8 3.4 7.11 10.97 11 14.3 18.3 22
200 8" 219.1 8.2 2.8 3.8 6.4 8.18 10.3 12.7 12.7 15.1 19.3 20.6 23 22.2
250 10" 273.1 9.3 3.4 4.2 6.4 9.27 12.7 12.7 15.1 19.3 21.4 25.4 28.6 25.4
300 12" 323.9 9.5 4 4.6 6.4 10.3 14.3 12.7 17.5 21.4 25.4 28.6 33.3 25.4
350 14" 355.6 9.5 4 4.8 6.4 7.9 11.1 15.1 12.7 19.1 23.8 27.8 31.8 35.7
400 16" 406.4 9.5 4.2 4.8 6.4 7.9 12.7 16.7 12.7 21.4 26.2 31 36.5 40.5
450 18" 457.2 9.5 4.2 4.8 6.4 7.9 14.3 19.1 12.7 23.8 29.4 34.9 39.7 45.2
500 20" 508 9.5 4.8 5.5 6.4 9.5 15.1 20.6 12.7 26.2 32.5 38.1 44.5 50
550 22" 558.8 9.5 4.8 5.5 6.4 9.5 22.2 12.7 28.6 34.9 41.3 47.6 54
600 24" 609.6 9.5 5.5 6.4 6.4 9.5 17.5 24.6 12.7 31 38.9 46 52.4 59.5
650 26" 660.4 9.5 7.9 13 12.7
700 28" 711.2 9.5 7.9 13 12.7
750 30" 762 9.5 6.4 7.9 7.9 13 12.7
800 32" 812.8 9.5 7.9 13 17.5 12.7
850 34" 863.6 9.5 7.9 13 17.5 12.7
900 36" 914.4 9.5 7.9 13 19.1 12.7

Alloy Galvanized Pipe Weight Chart

Size NPS O.D. Wall Thickness Pipe I.D. Weight per Foot Standard to XXHY Schedule
Pipe #
Section Modulus Gallon Capacity Per Linear Foot
1/2 0.84 0.109 0.622 0.85 STD 40 .0407 .0158
0.147 0.546 1.09 XHY 80 .0478 .0122
0.188 0.464 1.31 160 .0528 .0088
0.294 0.252 1.72 XXHY .0577 .0026
3/4 1.05 0.113 0.824 1.13 STD 40 .0705 .0277
0.154 0.742 1.48 XHY 80 .0853 .0225
0.219 0.612 1.95 160 .1006 .0153
0.308 0.434 2.44 XXHY .1103 .0077
1 1.315 0.133 1.049 1.68 STD 40 .1328 .0449
0.179 0.957 2.17 XHY 80 .1606 .0374
0.250 0.815 2.85 160 .1904 .0271
0.358 0.599 3.66 XXHY .2136 .0146
1 1/4 1.66 0.140 1.380 2.27 STD 40 .2346 .0777
0.191 1.278 3.00 XHY 80 .2913 .0666
0.250 1.160 3.77 160 .3421 .0549
0.382 0.896 5.22 .4110 .0328
1 1/2 1.90 0.145 1.610 2.72 STD 40 .3262 .1058
0.200 1.500 3.63 XHY 80 .4118 .0918
0.281 1.338 4.86 160 .5079 .0730
0.400 1.100 6.41 .5977 .0494
2 2.375 0.109 2.157 2.64 10 .4205 .1898
0.154 2.067 3.66 STD 40 .5606 .1743
0.218 1.939 5.03 XHY 80 .7309 .1534
0.250 1.875 5.68 .8045 .1434
0.281 1.813 6.29 .8666 .1344
0.344 1.687 7.47 160 .9806 .1161
0.436 1.503 9.04 XXHY 1.1043 .0922
2 1/2 2.875 0.120 2.635 3.53 10 .6870 .2833
0.203 2.469 5.80 STD. 40 1.0640 .2487
0.216 2.443 6.14 1.1169 .2435
0.250 2.375 7.02 1.2468 .2301
0.276 2.323 7.67 XHY 80 1.3386 .2202
0.375 2.125 10.02 160 1.6371 .1842
0.552 1.771 13.71 XXXHY 1.9971 .1280
3 3.50 0.120 3.260 4.34 1.0411 .4336
0.156 3.188 5.58 1.3122 .4147
0.172 3.156 6.12 1.4265 .4064
0.188 3.124 6.66 1.5342 .3984
0.216 3.068 7.58 STD. 40 1.7241 .3840
0.250 3.000 8.69 1.9372 .3672
0.281 2.938 9.67 2.1207 .3521
0.300 2.900 10.26 XHY 80 2.2253 .3431
0.438 2.624 14.34 160 2.8774 .2811
0.600 2.300 18.6 XXHY 3.4243 .2158
3 1/2 4.0 0.120 3.760 4.98 10 1.3776 .5768
0.226 3.548 9.12 STD. 140 2.3939 .5136
0.250 3.500 10.02 2.6001 .4998
0.281 3.438 11.17 2.8562 .4821
0.318 3.364 12.52 XHY 80 3.1400 .4617
0.636 2..728 22.87 XXHY 4.8795 .3085
4 4.5 0.120 4.260 5.62 10 1.7612 .7404
0.156 4.188 7.24 2.2354 .7156
0.188 4.124 8.67 2.6296 .6942
0.203 4.094 9.32 2.8173 .6838
0.219 4.062 10.02 3.0184 .6725
0.237 4.026 10.80 STD. 40 3.2145 .6613
0.250 4.000 11.36 3.3611 .6528
0.281 3.938 12.67 60 3.7021 .6326
0.312 3.876 13.97 4.0273 .6126
0.337 3.826 15.00 XHY 80 4.2713 .5972
0.438 3.624 19.02 120 5.1790 .5361
0.531 3.438 22.53 160 5.8997 .4822
0.674 3.152 27.57 XXHY 6.7927 .4054
5 5.563 0.188 5.187 10.80 4.1161 1.0979
0.219 5.125 12.51 4.7279 1.0716
0.258 5.047 14.63 STD. 40 5.4500 1.0391
0.281 5.001 15.87 5.8644 1.0204
0.312 4.939 17.51 6.4074 .99647
0.344 4.875 19.19 6.9358 .9696
0.375 4.813 20.80 XHY 80 7.4300 .9449
0.500 4.563 27.06 120 9.2534 .8495
0.625 4.313 32.99 160 10.7976 .7590
0.750 4.063 38.59 XXHY 12.0954 .6734
6 6.625 0.109 6.407 7.59 5 3.5769 1.6748
0.134 6.357 9.30 10 4.3475 1.6488
0.156 6.313 10.79 5.0107 1.6260
0.188 6.249 12.94 5.9351 1.5937
0.203 6.219 13.94 6.3804 1.5780
0.219 6.187 15.00 6.8261 1.5620
0.250 6.125 17.04 7.6905 1.5306
0.280 6.065 18.99 STD. 40 8.4958 1.5008
0.312 6.001 21.06 9.3416 1.4688
0.344 5.937 23.10 10.111 1.4391
0.375 5.875 25.05 10.893 1.4082
0.432 5.761 28.60 XHY 80 12.224 1.3541
0.500 5.625 32.74 13.711 1.2909
0.562 5.501 36.43 120 14.9806 1.2346
0.625 5.375 40.09 16.1821 1.1787
0.719 5.187 45.39 160 17.8243 1.0977
0.864 4.897 53.21 XXHY 20.025 .9784
1.000 4.625 60.13 21.7719 .8727
1.125 4.375 66.14 23.1237 .7809
View ASME SA335M High Alloy Steel Round Pipe Standard Weights, Custom sizes of Chrome Alloy Steel Schedule 40, Get Chromoly alloy steel Square Pipe Pressure Rating.

Pressure Rating of Alloy Steel Seamless Pipe

Minimal
Pipe Size
Outer Dia. Schedule
(inch.) (inch.) STD 10 20 30 XS 100 60 80 140 XXS 120 40 160
           
3/8 0.675 6606 9147 9147 6606
               
1/2 0.84 6358 8575 8575 17150 6358 10908
14 14 1313 875 1092 1313 1750 3283 2079 2625 4375 3829 1533 4921
18 18 1021 681 849 1192 1361 3147 2042 2553 4252 3743 1530 4848
42 42 438 583 729 875
1 1.315 4956 6670 6670 13340 4956 9316
20 20 919 613 919 1225 1225 3138 1989 2526 4288 3675 1455 4824
30 30 613 510 817 1021 817
34 34 540 450 721 901 992
1 1/4 1.66 4133 5638 5638 11276 4133 7380
2 2.375 3177 4498 4498 8995 3177 7097
2 1/2 2.875 3460 4704 4704 9408 3460 6391
3 1/2 4 2769 3896 3896 2769
4 4.5 2581 3670 3670 7339 4769 2581 5782
6 6.625 2071 3195 3195 6390 4157 2071 5318
8 8.625 1829 1420 1574 2841 3375 2307 2841 4613 4971 4085 1829 5147
12 12.75 1441 961 1268 1922 3244 2160 2644 4324 3843 3843 1560 5042
24 24 766 510 766 1147 1021 3126 1978 2489 4210 3700 1405 4786

ASTM A335 Alloy Steel ERW Pipe Mechanical Properties Tensile Strength

Tensile Strength, MPa Elongation, % Yield Strength, MPa
415 min 30 min 205 min

Different High temperature Alloy Steel Pipe Suppliers in India

Chrome Moly Seamless Alloy Cold Drawn Steel Pipe

Chrome Moly Seamless Alloy Cold Drawn Steel Pipe

OD 25.4 mm, A179 Alloy Steel Pipes, LG 9146 mm, WT 3.05 mm

OD 25.4 mm, A179 Alloy Steel Pipes, LG 9146 mm, WT 3.05 mm

Alloy Steel Boiler Pipes

Alloy Steel Boiler Pipes

ANSI B36.19, Alloy Steel Seamless Pipe, 12 Inch

ANSI B36.19, Alloy Steel Seamless Pipe, 12 Inch

Alloy Seamless Steel Pipes 4140 4135 4130 +Qt Heat Treatment

Alloy Seamless Steel Pipes 4140 4135 4130 +Qt Heat Treatment

Alloy Steel Square Pipes

Alloy Steel Square Pipes

20cr 40cr Alloy Steel Seamless Pipes

20cr 40cr Alloy Steel Seamless Pipes

Alloy Steel Square Tube

Alloy Steel Square Tube

Alloy Q235 200x200 Steel Square Pipe

Alloy Q235 200x200 Steel Square Pipe

High Strength Low Alloy Steel Tube

High Strength Low Alloy Steel Tube

Alloy Steel Honed Hydraulic Cylinder Pipes

Alloy Steel Honed Hydraulic Cylinder Pipes

15NiCuMoNb5 W-Nr 1.6368 20mm 321 Thick Alloy Steel Seamless Pipes

15NiCuMoNb5 W-Nr 1.6368 20mm 321 Thick Alloy Steel Seamless Pipes

We can arrange Alloy chrome molybdenum steel DSAW/ LSAW in minimum quantity, Check out ASTM A335 Pipe thickness chart, Alloy Steel tube suppliers in Mumbai.

Seamless ferritic Alloy-steel Pipe Thickness Chart

Types of ASTM A335 Pipe Wall thickness Length O.D.
Seamless Alloy Steel Pipe (Made to order Size) As per demand Upto 6 m 5.0 ~ 203.2 millimeter
NB Sizes (in stock) SCH 5 / SCH 80 / SCH 40 / SCH 10 / SCH 160 Upto 6 m 1/8” ~ 8”
Alloy Welded Pipes (Inventary + Custom-made Size) 1.0 ~ 15.0 millimeter Upto 6 m 5.0 ~ 1219.2 millimeter

Other Low Alloy Steel Pipe Grades Chart


Low Alloy Seamless Steel Pipe Diameter

ASTM A450 Hot rolled Outside Diameter, mm Tolerance, mm
OD≤101.6 +0.4/-0.8
101.6<OD≤190.5 +0.4/-1.2
190.5<OD≤228.6 +0.4/-1.6
Cold Drawn Outside Diameter, mm Tolerance, mm
OD<25.4 ±0.10
25.4≤OD≤38.1 ±0.15
38.1<OD<50.8 ±0.20
50.8≤OD<63.5 ±0.25
63.5≤OD<76.2 ±0.30
76.2≤OD≤101.6 ±0.38
101.6<OD≤190.5 +0.38/-0.64
190.5<OD≤228.6 +0.38/-1.14
ASTM A530 & ASTM A335 NPS Outside Diameter, inch Tolerance, mm
1/8≤OD≤1-1/2 ±0.40
1-1/2<OD≤4 ±0.79
4<OD≤8 +1.59/-0.79
8<OD≤12 +2.38/-0.79
OD>12 ±1%

Alloy Steel Pipe Chemical Composition

Carbon Chromium Manganese Molybdenum Phosphorus Sulfur Silicon
0.05 to 0.15 1.00 to 1.50 0.30 to 0.60 0.44 to 0.65 0.025 max 0.025 max 0.50 to 1.00

ASTM A335 Pipe Dimension Tolerances

NPS (inch) O.D. Tolerance Chart NPS (inch) Wall Thk Tolerance Chart
1/8 ≤ NPS ≤ 1 1/2″ +/- 0.4 1/8″ ≤ NPS ≤ 2 1/2″ , All T/D ratios. +20%, -12.5%
1 1/2 < NPS ≤ 4″ +/- 0.79 NPS ≥ 2 1/2″ , T/D ≤ 5% +22.5%, -12.5%
4″ < NPS ≤ 8″ +1.59, -0.79 NPS ≥ 2 1/2″ , T/D > 5% +15%, -12.5%
8″ < NPS ≤ 12″ +2.38, -0.79 (T= Specified Wall Thickness; D = Specified Outside Diameter)
NPS > 12″ +/- 1%

Alloy Pipe Standards

types of Material Standard Code Chart Grades Chart
High Temp Alloy Steel Smys Pipes (Ferritic) EN10216-2 13CrMo4-5 10CrMo9-10 X10CrMoVNb9-1 15NiCuMoNb5-6-4
Low Alloy Steel Tubing ASME SA 519/ ASTM A519 4130X, 4140, 4130
Alloy Steel IBR approved Heat-Exchanger Tubes, Superheater, Seamless Austentic and Ferritic Boiler ASME SA 213/ ASTM A213 T9, T23, T1, T5, T2, T12, T92, T91, T22, T11
High Temperature AS Seamless Pipes (Ferritic) ASME SA 335/ASTM A335 P22, P5, P1, P91, P9, P17, P11, P92, P12

High Alloy Steel Pipe Price List

Product Price
High pressure vessel 3 inch Sch40 seamless alloy steel pipe $618.00 - $708.00/ Ton
S355JR Cold Rolled Alloy Steel Seamless Pipe $520.00 - $840.00/ Ton
AISI 4130, 4140 Seamless alloy steel pipe $1.20 - $3.25/ Kilogram
4130 Alloy cold rolled steel pipe $550.00 - $590.00/ Ton

Find your sizes in our stock of Alloy Steel tube in Mumbai, Many Low Alloy Steel Pipe suppliers, distributors, retailers, stockholders, stockists, dealers, importers, exporters, and wholesalers choose us for the best price of Alloy Steel Boiler tubes in India, Contact for a Quick Quote!

Alloy Steel Seamless Pipe HS Code

HS CODE DESCRIPTION
7304 Tubes, Pipes And Hollow Profiles, Seamless, Of Iron (Other Than Cast Iron) Or Steel
73049000 Other
73045930 Above 219.1 mm outer diameter
73041190 Other
73045920 Above 114.3 mm but up to 219.1 mm outer diameter
7307 Tube Or Pipe Fittings (For Example, Couplings, Elbows, Sleeves), Of Iron Or Steel
73072900 Other
7306 Other Tubes, Pipes And Hollow Profiles (For Example, Open Seam Or Welded, Riveted Or Similarly Closed), Of Iron Or Stee
73063090 Other
73065000 Other, welded, of circular cross-section, of other alloy steel
7307 Tube Or Pipe Fittings (For Example, Couplings, Elbows, Sleeves), Of Iron Or Steel
73079390 Other
73079190 Other
7304 Tubes, Pipes And Hollow Profiles, Seamless, Of Iron (Other Than Cast Iron) Or Steel
73043939 Other

Heat Treatment of AS Pipe

  Alloy P5, P9, P11, and P22    
Grade Heat Treatment Type Normalizing Temperature Range F [C] Subcritical Annealing 
or Tempering 
Temperature Range F 

[C]
P5 (b,c) Full or Isothermal Anneal    
  Normalize and Temper ***** 1250 [675]
  Subcritical Anneal (P5c only) ***** 1325 - 1375 [715 - 745]
P11 Full or Isothermal Anneal    
  Normalize and Temper ***** 1200 [650]
P22 Full or Isothermal Anneal    
  Normalize and Temper ***** 1250 [675]
P91 Normalize and Temper 1900-1975 [1040 - 1080] 1350-1470 [730 - 800]
  Quench and Temper 1900-1975 [1040 - 1080] 1350-1470 [730 - 800]

Alloy Steel Pipe Roughness

Surface Finish Internal Surface (ID) External Surface (OD)
Roughness Average (RA) Roughness Average (RA)
μ inch μm μ inch μm
AP Annealed & Pickled Not defined Not defined 40 or Not defined 1.0 or Not defined
BA Beight Annealed 40,32,25,20 1.0,0.8,0.6,0.5 32 0.8
MP Mechanical Polish 40,32,25,20 1.0,0.8,0.6,0.5 32 0.8
EP Electro Polish 15,10,7,5 0.38,0.25,0.20;0.13 32 0.8

Alloy Steel Rectangular tube Equivalent Grades

Name Temper Specification
Alloy 4130 N MILT6736, AMS6360, AMS6371
Alloy 4140 N, A, T AMS6381
Alloy 15CDV6 T1080, T980 AIR9160C, 1.7734.5, 1.7734.6

Applications of Alloy Steel Pipe and Tube

Heat Exchangers
Heat Exchangers
Petrochemicals
Petrochemicals
Off-Shore Oil Drilling
Off-Shore Oil Drilling
Condensers
Condensers
Power Generation
Power Generation
Pharmaceutical Equipment
Pharmaceutical Equipment

Further Classification of Alloy Steel Welded Pipes

Further Classification of Alloy Steel Welded Pipes

Most Renowned Alloy Steel Pipe Suppliers and Manufacturers in below locations

Big Dia Precision 25crmo4 Alloy Steel Pipes Germany, Thailand, Malaysia, Chennai, Czechia, Thiruvananthapuram
Customized cold rolled alloy precision seamless steel pipes Visakhapatnam, Bhopal, Italy, Delhi, Singapore, Iran, Chile
4130 Hydraulic cylinder as seamless round pipes South Africa, Saudi Arabia (KSA), Ahmedabad, Kuwait, Brazil
Sch80 XS Sch160 XXS AS Pipes Ludhiana, Canada, Singapore, Philippines, Jaipur, Malaysia
34CrMo4 Alloy Seamless Steel Pipes Colombia, Malaysia, Rajkot, Sweden, China, Vadodara
High quality AISI 4140 42CrMo4 +QT Alloy Round Pipes Sikandrabad, Thailand, Europe, Qatar, France, Bengaluru
High quality 12cr1mov Alloy steel pipes UK, France, Philippines, Hyderabad, Nigeria, Thane, Australia
Seamless Ferritic Alloy-Steel Pipes for Superheater, Boiler, and Heat-Exchanger Norway, Malaysia, Coimbatore, Turkey, United Arab Emirates (UAE)
En10305 E355 Cold Rolled Alloy Seamless Pipes Bhuneshwar, Taiwan, Los Alamos -Mexico, Malaysia, Philippines
AISI 4340 Alloy seamless pipes Agra, Bahrain, Singapore, Pakistan, Kolkata, South Africa
Hot Rolled 42CrMo Round Seamless AS Pipes Patna, Oman, Ahmedabad, UAE, Malaysia, Hong Kong
24 inch sch 80 sch 160 Heavy thick wall Alloy steel pipes Russia, Dehradun, Malaysia, Dubai, Kochi, Netherlands
DIN 1.3343 W6mo5cr4V2 Alloy Steel Round Pipes Malaysia, Bangladesh, Finland, USA, Surat, Pune
AISI 4130 4140 Chrome Steel 30CrMo AS Pipes Mumbai, Belgium, Philippines, Noida, Indonesia, Dammam -KSA
SCH80 Alloy steel 7 inch pipes Philippines, Malaysia, Los Alamos -Mexico, Taiwan, Bhuneshwar
Q345B S355 Low Alloy steel seamless pipes Chandigarh, Romania, Malaysia, Europe, Japan, Faridabad
200mm Diameter Alloy 16 Inch Seamless Steel Pipes UAE, Indore, Malaysia, Europe, United Kingdom -UK
AS Seamless Tubes Pipes Od10~900mm Wt1~100mm Canada, Navi Mumbai, UK, Ellington -United States, Poland
High Pressure AS 12Cr1MoV boiler tube South Korea, Singapore, Gurgaon, Malaysia, NY 12203 (USA)
Cold Rolled Alloy 12 inch seamless Steel pipes Nashik, Nagpur, Mexico, UK, Egypt, Lucknow, Spain

 

 

Top