CALL US

+(91) 022 66310022

Stainless Steel 316 Coil

ASTM A240 316 Stainless steel strip Suppliers in India

Similar to plates, tubes, bars, pipes, and rods, coil also are made up of various metals and alloys. One such type of product is Stainless Steel 316 Coil that work in severe conditions such as seawater. These coil offer better resistance to corrosion as compared to other stainless steel due to the addition of chromium and molybdenum. These SS 316 coils display excellent welding properties as they resist carbide precipitation during welding. They are also known as marine grade stainless steel coils due to their high resistance against the chlorinated solution. 316 Stainless steel strip displays good strength due to the high content of molybdenum along with high creep at elevated temperatures.

Stainless Steel 316 Coil

ASTM A240 316 strip

ASTM A240 Type 316 coil sheet

Get ASTM A240 Type 316 coil sheet in Hot and Cold rolled Finish

ASTM A240 Type 316 Slitting Coil is also resistant to potable water with limited chlorides at ambient temperature. They also avoid intergranular corrosion. Though this steel grade is known as marine grade they are not resistant to warm water. Due to this reason in many marine environments 316 stainless steel coil stock display surface corrosion that can be identified as brown stains. It is mainly because of the crevice and rough surface finish. In case of intermittent use, these 1.4401 coils can be used up to temperature 870 degrees C, and in case of continuous service, they can be used up to 925 degrees C.

ss316 coil manufacturers recommend their use in chemical transportation, boat fitting, laboratory bench fitting, petrochemical equipment as so on. They can be annealed to avoid decay and can be easily rolled. UNS S31600 Stainless steel thin strips are also used in architectural trim, molding, sink, automotive industry, and aerospace structure. ASTM A240 TP 316 coil sheet has a melting point of 1400 degrees C.

Stainless Steel 316 Coil

Visit us for AISI 316 UNS S31600 Slit coil Weight Chart, Stainless Steel 316 trim strips Manufacturer in India

Specification of Stainless Steel 316 Coil

Standard ASTM A240
Thickness 0.3~10.0mm
Surface 2B, hair line, NO.1, checkered, NO.4, 8K, mirror, embossed, 2D, BA, Brush, NO.8, sand blast, etching, etc
Length 2440mm, 2000mm, 3000mm, 6000mm, 5800mm, etc
Contact our executive in Mexico, Thiruvananthapuram, Janeiro, Calgary, Nagpur, Ahvaz, Chennai, Lagos, Baroda, Riyadh, Mumbai, Rajkot, Hyderabad, Sydney, Melbourne, Khobar, Istanbul, Vadodara, Bengaluru, Kolkata, Howrah, London, Caracas, Gimhae-si, Surat, Abu Dhabi, Ernakulam, Karachi, Gujarat, Noida, Coimbatore, Bangalore, Manama, India, Bogota, Ahmedabad, Indore, Pimpri-Chinchwad, Ludhiana, Kuwait, Muscat, Kanpur, Jamshedpur, Courbevoie, Tehran, Dammam, Santiago, Tau, Ludhiana, Perth, Montreal, Port-of-Spain, Ranchi, Gurgaon, New Delhi, Ankara
Package Standard export package, suit for all kinds of transport, or as
required.
Width Supplier of 1800mm, 1000mm, 1500mm, 2000mm, 1219mm, 2500mm, 3500mm, 3000mm, etc
Brand: European / Japanese / Indian / US / Korea

Chemical Composition of ASTM A240 316 strip

Grade C Mn Si P S Cr Mo Ni Fe
Stainless Steel 316 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 16.00 - 18.00 2.00 - 3.00 11.00 - 14.00 67.845 min
Click here to buy DIN 1.4401 flat trim strips at low price, View ASTM A240 Type 316 Stainless steel Hot rolled coil Yield Strength

Mechanical Properties of ASTM A240 Type 316 coil sheet

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi - 75000 , MPa - 515 Psi - 30000 , MPa - 205 35 %

Equivalent Grade of SS 316 coils

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Stainless Steel 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 - Z7CND17-11-02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3

Linear Coefficient of Thermal Expansion of AISI 316 UNS S31600 Slit coil

Temperature Range Mean Coefficient of Thermal Expansion
°C °F cm/cm/°C in/in/°F
20 - 100 68-212 16.5 · 10-6 9.2 · 10-6
20 - 500 68-932 18.2 · 10-6 10.1 · 10-6
20 - 1000 68-1832 19.5 · 10-6 10.8 · 10-6
Exporter of 2b finish Stainless Steel 316 Cold rolled coil, We offer Micro and Macro tested ASME SA240 Gr 316 strip coil

List of Stainless Steel 316 Coil Types Supplier in India

316 Stainless steel strip

316 Stainless steel strip

ASTM A240 Type 316 Slitting Coil

ASTM A240 Type 316 Slitting Coil

ss316 coil

ss316 coil

316 stainless steel coil

316 stainless steel coil

Stainless Steel 1.4401 coils

Stainless Steel 1.4401 coils

UNS S31600 Stainless steel thin strips

UNS S31600 Stainless steel thin strips

ASTM A240 TP 316 coil sheet

ASTM A240 TP 316 coil sheet

SS 316 coils

SS 316 coils

AISI 316 UNS S31600 Slit coil

AISI 316 UNS S31600 Slit coil

Stainless Steel 316 Hot Rolled Coil

Stainless Steel 316 Hot Rolled Coil

Plat Strip Stainless 316

Plat Strip Stainless 316

316 Stainless Steel Coil Heat Exchanger

316 Stainless Steel Coil Heat Exchanger

Benefits of ASTM A240 TP 316 Perforated Strip

  • Resistant to High Pressure
  • Great Strength
  • Good Formality
  • Resistant High Mechanical Stresses
  • Reusable

Stainless Steel 316 Trim Strips Thickness Tolerance

Strip Thickness Width
320≤W<600 W<320
T1 T2 T3 T4
T<0.05 mm 0.004 0.003 0.003 0.002
0.05≤T<0.07 0.005 0.004 0.004 0.003
0.07≤T<0.08 0.006 0.005 0.005 0.003
0.08≤T<0.10 0.007 0.005 0.005 0.003
0.10≤T<0.13 0.009 0.007 0.006 0.004
0.13≤T<0.15 0.010 0.008 0.007 0.004
0.15≤T<0.20 0.011 0.009 0.008 0.004
0.20≤T<0.25 0.013 0.010 0.008 0.005
0.25≤T<0.30 0.015 0.011 0.009 0.005
0.30≤T<0.35 0.016 0.012 0.010 0.005
0.35≤T<0.40 0.018 0.012 0.010 0.005
0.40≤T<0.50 0.020 0.015 0.012 0.005
0.50≤T<0.60 0.022 0.018 0.013 0.005
0.60≤T<0.70 0.024 0.020 0.015 0.005
0.70≤T<0.80 0.026 0.022 0.017 0.005
0.80≤T<0.90 0.028 0.024 0.018 0.006
0.90≤T<1.00 0.032 0.027 0.020 0.008
1.00≤T<1.20 0.035 0.030 0.022 0.008
1.20≤T<1.40 0.040 0.035 0.025 0.010
1.40≤T<1.60 0.045 0.040 0.030 0.020

316 Stainless Steel Slitting Coil Size Chart

Size
(millimeter)
Wght per
Coil (kilogram)
Size
(millimeter)
Wght per
Coil (kilogram)
2000 x 1000 x 3.0 51.0 4000 x 2000 x 6.0 408.0
2500 x 1250 x 3.0 79.7 2500 x 1250 x 8.0 213.0
3000 x 1500 x 3.0 115.0 3000 x 1500 x 8.0 306.0
2000 x 1000 x 4.0 68.0 4000 x 2000 x 8.0 544.0
2500 x 1250 x 4.0 106.0 2500 x 1250 x 10.0 266.0
3000 x 1500 x 4.0 153.0 3000 x 1500 x 10.0 383.0
2000 x 1000 x 5.0 85.0 4000 x 1500 x 10.0 510.0
2500 x 1250 x 5.0 133.0 4000 x 2000 x 10.0 680.0
3000 x 1500 x 5.0 191.0 2500 x 1250 x 12.0 319.0
4000 x 2000 x 5.0 340.0 3000 x 1500 x 12.0 459.0
2000 x 1000 x 6.0 102.0 4000 x 1500 x 12.0 612.0
2500 x 1250 x 6.0 159.0 4000 x 2000 x 12.0 816.0
3000 x 1500 x 6.0 230.0    

Different Test conducted on Stainless Steel 316 Edge Strip

  • Micro and macro test
  • Alloy test
  • Chemical test
  • Raw material test
  • Hydrostatic test

Weight Chart of ASME SA240 Grade 316 Cold rolled Coil

Thick. on base (millimeter) Unit Wght / Coil (kilogram)
3000 x1000 x3.0 78.0
3000 x1250 x4.5 143.0
3000 x1250 x6.0 180.0
3000 x1250 x8.0 210.0

Stainless Steel Grade 316 Coil Price in India

Product Price
Hot Rolled Stainless Steel Wide Coils (Having >8%) 8x1500xcoil -316/no1/trim Edge $2.10/ Kilogram
Cold Rolled Stainless Steel Strips Finish Half Hard Grade SS316 Size: 0.50 X305 mm $3.18/ Kilogram
Stainless Steel Cr Coils, Spec. 0.762 X 1219.200 mm X Coil- 316/2b/ Trim Edge $2.42/ Kilogram
Cold Rolled Strips Of Stainless Steel Grade:316 Size: 0.19 X 185.00 mm $2.96/ Kilogram

Many ASTM A240 Gr 316 Blank Strip suppliers, wholesalers, stockholders, distributors, importers, retailers, exporters, stockists, and dealers choose us for the best price of 316 Stainless Strips in India, Find your sizes in our stock of Stainless Steel 316 Embossed Strip in Mumbai, Contact for a Quick Quote!

316 Stainless Steel Strip Roll Uses

  • Stamped Machined
  • Appliances
  • Foodservice Equipment
  • Automotive Trim
  • Railway Cars
  • Cookware

Stainless Steel 316 Flat Trim Strips Tolerances

Thick. Tolerances < 6” (AMS 2242) Tolerance (inch) +/-
over .050 - .062 incl +/- .0030
over .035 - .050 incl +/- .0025
over .029 - .035 incl +/- .0020
over .020 - .029 incl +/- .0020
over .017 - .020 incl +/- .0015
over .013 - .017 incl +/- .0015
over .011 - .013 incl +/- .0015
over .010 - .011 incl +/- .0015
under .010 +/- 10%

Types of Packaging We Offer for SS316 Coil

  • Wooden Boxes
  • Carton boxes
  • Bundles (hexagonal)
  • Shrink-wrapped
  • Crates (steel/wooden)

UNS S31600 Hot rolled coil Physical Properties

Density
lbm/in3
Thermal Conductivity
(BTU/h ft. °F)
Electrical
Resistivity
(in x 10-6)
Modulus of
Elasticity
(psi x 106
Coefficient of
Thermal Expansion
(in/in)/
°F x 10-6
Specific Heat
(BTU/lb/
°F)
Melting
Range
(°F)
0.29 at 68°F 100.8 at 68 212°F 29.1 at 68°F 29 8.9 at 32 – 212°F 0.108 at 68°F 2500 to 2550
        9.7 at 32 – 1000°F 0.116 at 200°F  
        11.1 at 32 – 1500°F    

Thickness Chart of ASTM A240 Grade 316 Strip Coil

Surface finish Thickness
(mm)
Width
(mm)
2A 0,50 - 1,00 35 - 1280
Bright-pickled 0,20 - 4,00 30 - 1530
Brushed or dull polished 0,20 - 3,00 30 - 1530
Bright annealed, Cold rolled 0,05 - 3,50 3 - 1530
Heat Treated, Cold rolled 0,40 - 7,00 30 - 2000
Heat Treated, Cold rolled, mech. desc. pickled 0,30 - 7,92 Dec-70
Pickled, Heat Treated, Cold rolled 0,20 - 6,50 30 - 1600
Pickled, Cold rolled, Skin Passed, Heat Treated 0,25 - 6,35 Dec-32
Heat Treated, Cold rolled, Skin Passed 0,33 - 3,58 12 - 1524
Ground 0,20 - 6,00 12 - 1580
Patterned 0,30 - 3,50 30 - 1530
Profile rolled 0,40 - 1,50 36 - 1275
Satin finish 0,50 - 4,00 12 - 1580
Surface coated 0,40 - 3,00 30 - 1500
Work hardened 0,05 - 6,00 3 - 1530

Stainless Steel 316 Thin Strips Processing

  • Cutting
  • Forming Machining/ Drilling
  • Grinding
  • Testing

Regular Suppliers of Stainless Steel 316 Strip in below Locations

1.0mm thick half hard SS 316 strip Coil Russia, Dehradun, Dubai, Malaysia, Netherlands, Kochi
Hot Rolled Stainless Grade 316 Coil 4x8 Bengaluru, France, Thailand, Qatar, Sikandrabad, Europe
1mm BA 2B Thickness Cold Rolled SS 316 Slitting Coil Lucknow, Nagpur, Spain, UK, Egypt, Nashik, Mexico
Thickness: 0.18 - 2.1 mm, Stainless Steel 316 coil sheet Malaysia, China, Colombia, Vadodara, Rajkot, Sweden
316 Stainless Steel Strip roll for Automobile Industry, Thickness: 0.10 mm To 6 mm United Kingdom -UK, Malaysia, UAE, Indore, Europe
ASTM A240 Type 316 slit Coil 2b Finish 0.5mm 0.6mm Turkey, Norway, Malaysia, Coimbatore, United Arab Emirates (UAE)
2B Finish Cold Rolled ASTM A240 Gr 316 Strip coil Ludhiana, Canada, Malaysia, Singapore, Philippines, Jaipur
Cold Rolled Stainless Steel 316 Roofing Sheet Coil Malaysia, Hong Kong, Patna, Oman, UAE, Ahmedabad
Silver Stainless Steel 316 Strip Coil, Thicknesses: 0.03mm To 3mm Bhopal, Italy, Delhi, Visakhapatnam, Singapore, Chile, Iran
Rectangular SS 316 thin strips, Thickness: 2mm To 100mm, For Oil and Gas Industry Dammam -KSA, Indonesia, Noida, Philippines, Mumbai, Belgium
Mirror Finished Cold Roll SS 316 Steel Coil Ellington -United States, UK, Navi Mumbai, Poland, Canada
Stainless 316 Strips Coil, Thickness: 0.20mm South Korea, Gurgaon, NY 12203 (USA), Singapore, Malaysia
Cold rolled 1.5m 1m 1.2m Werkstoff 1.4401 coil Germany, Thiruvananthapuram, Malaysia, Chennai, Thailand, Czechia
Thickness: 0.1-6 mm, SRM Stainless Steel Grade 316 Strip Coil USA, Bangladesh, Finland, Malaysia, Surat, Pune
Thin cold rolled 316 SS coil thickness 0.4 mm Malaysia, Romania, Faridabad, Europe, Japan, Chandigarh
Thickness: 0.75 Mm, 5000 M Stainless Steel 316 slit coil, Width: 500 Mm France, Philippines, Thane, Nigeria, Hyderabad, UK, Australia
Length: 6 m, Thickness: 1-60 mm, Stainless Steel 316 Hot Rolled Coil Taiwan, Philippines, Bhuneshwar, Malaysia, Los Alamos -Mexico
Thickness: 2 mm, Width: 50mm ~ 2000mm, Stainless Steel 316 flat trim strips Ahmedabad, Saudi Arabia (KSA), Brazil, South Africa, Kuwait
5mm thickness Stainless A240 316 strip roll coil Pakistan, South Africa, Kolkata, Singapore, Bahrain, Agra

 

 

Top