Stainless Steel 410 Plate

SAE 410 Stainless Steel sheet Suppliers in India

Grade 410 stainless steel is used in the production of a wide variety of products. One of the products produced using this grade is the Stainless Steel 410 Plate. They can be heat treated to obtain a variety of mechanical properties. It displays good hardness and strength along with resistance to corrosion. It can be formed in annealed conditions as it is ductile when annealed. In annealed as well as in heat treated conditions these ASTM A240 type 410 Stainless steel shim remains magnetic. They are also resistant to atmospheric conditions, water, and chemicals. However, in environments containing weak or diluted acetic acid, Naptha, or nitric acid these SS 410 Sheets can easily be used. The acid content in food is also resisted by these plates.

Stainless Steel 410 Plate

SAE 410 Stainless Steel sheet

ASTM A240 type 410 Perforated Plate

Refer ASTM A240 type 410 Perforated Plate Thickness chart, Wide Sizes of 410 Stainless steel shim Stock

410 Stainless steel sheet suppliers recommend these as they can be used in sulfuric acid conditions as well as slightly chlorinated and deaerated water. Hence it is said to be best suited for oil and gas applications as low hydrogen sulfide exists in them. In oxidizing conditions, the alloy used in UNS S41000 Polished Plate is prone to chloride attack. They operate well in moderate corrosion resistance and high mechanical property environments. Oxidation can be resisted by these plates up to 1500 degrees F in intermittent service and up to 1292 degrees F in continuous service.

Stainless Steel 410 Rolling Plate has a thickness that ranges from 3mm to 150mm. They offer resistance to rust in air water and certain chemicals. They are economical, versatile, and elastic which offers transmission of fluids from one place to another. DIN 1.4000 Clad Plate is used in cutlery, ore processing, sugar processing, press plates, gate valves, and petroleum refinery. Moreover, they are also used in petrochemical processing equipment.

Purchase ASME SA 240 Gr 410 Cold rolled Plate at cheap price, UNS S41000 Stainless steel Flat Shim Physical Chart

Stainless Steel 410 Plate Specification Format

ASTM Specification	ASTM A240 / ASME SA240
Temper	Annealed
Finish Types	Suppliers in Cold rolled, BA NO(8), Hot rolled, SATIN, 2B, 2D
Condition	Polished on both sides
Width	10-2500mm
Hardness	Half Hard, Hard, Soft, Quarter Hard, Spring Hard etc.
Length & Sizes	1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500mm x 3000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000mm x 4000mm to 6000mm, 2000 mm x 4000 mm, 2m, 2.44m, 3m, 1000 mm x 2000 mm, 1250mm x 2500mm, 36" X 120" or 48" X 144", 4' x 8', Cut to size available
Dealers & Distributor of	TISCO, LISCO, ESSAR, JINDAL, SAIL, TATA, BHUSHAN, JISCO, INDIAN, POSCO, BAOSTEEL IMPORTED material
Thickness	0.1mm to 100 mm Thk
Stock in form of	tread plate, Coils, Plate, Sheet, Foils, hot rolled, Rolls, Plain Sheet, Rolling Sheet, Flat Sheet, Rolling Plate, Shim Sheet, Strip, cold rolled, annealed, Flats, Clad Plate, soft annealed, descaled, sheared, Flat Shim, Blank (Circle), Checker Plate
Value Added Service	Cutting, Bending, Heat Treatment, Annealed, Cladding, Pickling, Forging, Polish, Rolling, Minor Fabrication Etc.

Chemical Structure of 410 Stainless steel sheet

Stainless Steel	Si	C	Mn	P	Cr	S	Mo	Ni	N
AISI 410	1.0 max	.15 max	1.0 max	.040 max	11.5 – 13.5	.030 max	–	0.50 max	–

View Werkstoff 1.4000 Flat Sheet Surface finish chart, ASTM A240 Grade 410 Hot rolled Plate Weight

DIN 1.4000 Clad Plate Mechanical Behaviour

SS	Yield Strength 0.2% offset ksi (MPa) Minimum	Tensile Strength ksi (MPa) Minimum	Elongation (% in 50mm) Minimum	Hardness (Brinell) Maximum	Hardness (Rockwell B) Maximum
Grade 410	30 (205)	65 (450)	20	217	96

ASTM A240 Grade 410 Hot rolled Plate Equivalent

WERKSTOFF NR.	GRADE	UNS	BS	JIS	GOST	AFNOR	EN
1.4006	AISI 410	S41000	410S21	SUS 410	–	–	X12Cr13

ASTM A240 type 410 Perforated Plate Dimensions Table

Metric Dimensions

Imperial Dimensions

Know Stainless Steel 410 Rolling Sheets Mechanical Characteristics, Exporter of SS 410 Clad Plate, 410 Stainless steel plate suppliers

SAE 410 Stainless Steel sheet Thickness & Sizes

Hole Dia mm	Hole Centres mm	O/A	Finish	Tck mm	Full Sheet Size mm
0.75	1.5	23%	2B	0.6	2000 x 1000
1	2	23%	2B	1.0	2000 x 1000
1.5	2.6	30%	2B	1.0	2000 x 1000
2	3.5	30%	2B	1.0	2000 x 1000
2	3.5	30%	2B	1.0	2000 x 1000
3	5	33%	2B	1.0	2000 x 1000
4	5.6	46%	2B	1.0	2000 x 1000
5	8	35%	2B	1.0	2000 x 1000
6	8	51%	2B	1.0	2000 x 1000
8	10	58%	2B	1,0	2000 x 1000

Most popular types of Stainless Steel 410 Plate

AISI 410 SS Checkered Plate Weight Chart

Plate Thick. (inch and mm)	Plate Sizes	Sheet Wght / Unit Area (lbs/ft² and kg/m²)	Estimated Wght / Sheet (lbs and kg)
0.015 , 0.381	36 x 96	0.630 , 3.07566	15.12 , 6.84936
0.015 , 0.381	36 x 120	0.630 , 3.07566	18.90 , 8.5617
0.0178 , 0.45212	36 x 96	0.756 , 3.690792	18.15 , 8.22195
0.0178 , 0.45212	36 x 120	0.756 , 3.690792	22.68 , 10.27404
0.0178 , 0.45212	48 x 96	0.756 , 3.690792	24.19 , 10.95807
0.0178 , 0.45212	48 x 120	0.756 , 3.690792	30.24 , 13.69872
0.0235 , 0.5969	30 x 96	1.008 , 4.921056	20.16 , 9.13248
0.0235 , 0.5969	30 x 120	1.008 , 4.921056	25.20 , 11.4156
0.0235 , 0.5969	36 x 96	1.008 , 4.921056	24.19 , 10.95807
0.0235 , 0.5969	36 x 120	1.008 , 4.921056	30.24 , 13.69872
0.0235 , 0.5969	36 x 144	1.008 , 4.921056	36.29 , 16.43937
0.0235 , 0.5969	48 x 96	1.008 , 4.921056	32.26 , 14.61378
0.0235 , 0.5969	48 x 120	1.008 , 4.921056	40.32 , 18.26496
0.0235 , 0.5969	48 x 144	1.008 , 4.921056	48.39 , 21.92067
0.0291 , 0.73914	30 x 96	1.260 , 6.15132	25.20 , 11.4156
0.0291 , 0.73914	30 x 120	1.260 , 6.15132	31.50 , 14.2695
0.0291 , 0.73914	36 x 96	1.260 , 6.15132	30.24 , 13.69872
0.0291 , 0.73914	36 x 120	1.260 , 6.15132	37.80 , 17.1234
0.0291 , 0.73914	36 x 144	1.260 , 6.15132	45.37 , 20.55261
0.0291 , 0.73914	48 x 96	1.260 , 6.15132	40.32 , 18.26496
0.0291 , 0.73914	48 x 120	1.260 , 6.15132	50.41 , 22.83573
0.0291 , 0.73914	48 x 144	1.260 , 6.15132	60.49 , 27.40197
0.0355 , 0.9017	30 x 96	1.512 , 7.381584	30.24 , 13.69872
0.0355 , 0.9017	30 x 120	1.512 , 7.381584	37.80 , 17.1234
0.0355 , 0.9017	36 x 96	1.512 , 7.381584	36.29 , 16.43937

Features of ASTM A240 Gr 410 Tread Plate

• Durability
• High strength
• High mechanical properties
• Magnetic property
• Toughness
• Hardness

410 Stainless Steel Plate Uses

• Expansion Joints
• Waste Treatment
• Aerospace
• Food Processing
• Pharmaceutical Production
• Petroleum Refining
• Chemical Processing

Stainless Steel 410 Cold rolled Plate Thickness Chart

Hot rolled thick plate	20-60mm
Hot rolled medium plate	4-20mm
Cold rolled thin plate	0.2-4mm
Hot rolled extra thick plate	60-115mm

Available Gauges of 410 Stainless Steel Sheet Metal

	Nominal Decimal	Standard Variance From
Sheet Metal Gauge	(Approximate inch.)	Nominal Decimal (+/- inch.)
7	0.1793	0.0080
8	0.1644	0.0080
9	0.1495	0.0080
10	0.1345	0.0070
11	0.1196	0.0050
12	0.1046	0.0050
13	0.0897	0.0050
14	0.0747	0.0040
15	0.0673	0.0040
16	0.0598	0.0030
17	0.0538	0.0030
18	0.0478	0.0030
19	0.0418	0.0030
20	0.0359	0.0030
21	0.0329	0.0025
22	0.0299	0.0020
23	0.0269	0.0020
24	0.0239	0.0020
25	0.0209	0.0015
26	0.0179	0.0015
28	0.0149	0.0010

SS 410 Sheet Thermal Conductivity

Temperature Range		W/m·K	Btu/(hr · ft · °F)
°C	°F
100	212	(0.249)	14.4

Stainless Steel 410 Rolling Plate Surface Finish Chart

Product	Finish	Thickness millimeter	Max Sheet Size millimeter
Grade 410	Plain 2B	0.9	2000 x 1000
	Bright	0.9	2000 x 1000
	Brushed Finish	0.9, 1.2	2000 x 1000, 2500 x 1250
	Rimex Super Mirror	0.8, 1.2	2400 x 1200, 2500 x 1250
	Embossed	0.8, 1.0	2500 x 1250

Thermal Expansion of SS 410 Plain Sheet

Temperature Range		Coefficients
°C	°F	cm/cm/°C	in/in/°F
20-200	68-392	10.5 x10-6	5.9 x 10-6
20-600	68-1112	11.6 x 10-6	6.5 x 10-6

Grade 410 Stainless Steel Shim Sheet Physical Properties

Melting Range	2700-2790°F 1482-1532°C
Density	0.276 lb/in3
Modulus of Elasticity	29 x 106 psi (200 GPa)
Specific Gravity	7.65

410 Stainless Steel Perforated Sheet Gauge Table

Stainless Steel	Specified Thick	Tolerance
11 Gauge	0.120" | 3.05 mm	± 0.005" | 0.13mm
12 Gauge	0.105” | 2.667mm	± 0.005" | 0.127mm
14 Gauge	0.075” | 1.905mm	± 0.004" | 0.102mm
16 Gauge	0.059” | 1.499mm	± 0.004" | 0.102mm
18 Gauge	0.048” | 1.219mm	± 0.003" | 0.076mm
20 Gauge	0.035” | 0.889mm	± 0.002" | 0.051mm
22 Gauge	0.031" | 0.79 mm	± 0.002" | 0.05mm
24 Gauge	0.025" | 0.64 mm	± 0.002" | 0.05mm

SS 410 Plate Price Per Kg

Product	Price
Stainless Steel Plate - Grade 410 - 0.040 Thick X 36 W X 120 L (Cold Rolled)	$6.18/ Kilogram
Hot Rolled Stainless Steel Plate Prime quality Spec. 10.000 X 1250 X 6.050mm -410	$1.32/ Kilogram
Stainless Steel Sheet as per ASTM A240 Gr. 410/UNS S41000, Size: 4 Ft X 8 Ft X3 mm Thk.	$10.13/ Piece
Stainless Steel Plate Grade ASTM A240 TP 410 / 1.4000 ( Hot Rolled) Size: 6 X 1500 X 3000 mm	$1.55/ Kilogram

Many 410 Stainless Steel Plate suppliers, exporters, importers, wholesalers, stockholders, distributors, dealers, stockists, and retailers find your sizes in our stock of SUS 410 Floor Sheet in Mumbai, Choose us for the best price of SA 240 Grade 410 Mirror Plate in India, Contact for a Quick Quote!

Standard Sizes of ASTM A240 TP 410 Polished Plate

SIZE	SIZE (millimeter)
.125"	3.18
.134"	3.40
.156"	3.96
.187"	4.75
.250"	6.35
.312"	7.92
.375"	9.53
.500"	12.7
.625"	15.9
.750"	19.1
.875"	22.2
1"	25.4
1.125"	28.6
1.250"	31.8
1.500"	38.1
1.750"	44.5
2"	50.8
2.500"	63.5
3"	76.2

410 Stainless Steel Perforated Plate Dimensions

Size (millimeter)	Wght per plate (kg)	Size (millimeter)	Wght per plate (kg)
2000 x 1000 x 6.0	102.0	4000 x 1500 x 12.0	612.0
2000 x 1000 x 3.0	51.0	4000 x 2000 x 6.0	408.0
2500 x 1250 x 6.0	159.0	4000 x 2000 x 12.0	816.0
3000 x 1500 x 4.0	153.0	3000 x 1500 x 10.0	383.0
2500 x 1250 x 3.0	79.7	2500 x 1250 x 8.0	213.0
4000 x 2000 x 5.0	340.0	3000 x 1500 x 12.0	459.0
2000 x 1000 x 4.0	68.0	4000 x 2000 x 8.0	544.0
3000 x 1500 x 5.0	191.0	2500 x 1250 x 12.0	319.0
3000 x 1500 x 3.0	115.0	3000 x 1500 x 8.0	306.0
2500 x 1250 x 4.0	106.0	2500 x 1250 x 10.0	266.0
2000 x 1000 x 5.0	85.0	4000 x 1500 x 10.0	510.0
2500 x 1250 x 5.0	133.0	4000 x 2000 x 10.0	680.0
3000 x 1500 x 6.0	230.0

Stainless Steel ASTM A240 410 Rolling Sheets Gauge Tolerance

Gauge		LB/Sq. Ft.	LB/Sq In.	Gauge Tolerance
				72″ Wide	96″ Wide
3/16	0.1875	8.579	0.05958	+.045″ -.010″	+.050″ -.010″
7/32	0.2187	9.870	0.06854
1/4	0.2500	11.162	0.07750
5/16	0.3125	13.746	0.09546
3/8	0.3750	16.496	0.11456	+.055″ -.010″	+.060″ -.010″
7/16	0.4375	19.080	0.13250
1/2	0.5000	21.633	0.15044
9/16	0.5625	24.247	0.16838
5/8	0.6250	26.831	0.18633
11/16	0.6875	29.415	0.20427
3/4	0.7500	32.123	0.22308	+.060″ -.010″	+.065″ -.010″
13/16	0.8125	34.707	0.24102
7/8	0.8750	37.291	0.25897
15/16	0.9375	39.875	0.27691
1	1.0000	42.665	0.29628	+.070″ -.010″	+.075 -.010″
1-1/8	1.1250	47.833	0.33217
1-1/4	1.2500	53.001	0.36806
1-3/8	1.3750	58.169	0.40395
1-1/2	1.5000	63.337	0.43984
1-3/4	1.7500	73.672	0.51161
2	2.0000	84.008	0.58339	+.125″ -.010″	+.150″ -.010″
2-1/8	2.1250	89.610	0.62229
2-1/4	2.2500	94.777	0.65817
2-1/2	2.5000	105.113	0.72995
2-3/4	2.7500	115.449	0.80173
3	3.0000	126.301	0.87709	+.150″ -.010″	+.160″ -.010″
3-1/2	3.5000	146.972	1.02064
4	4.0000	168.264	1.16850	+.180″ -.010″	+.200″ -.010

Stainless Steel 410 Flat Sheet Sizing Ranges

Hole Dia mm	Hole Centres mm	O/A	Finish	Tck mm	Full Sheet Size mm
0.75	1.5	23%	2B	0.6	2000 x 1000
1	2	23%	2B	1.0	2000 x 1000
1.5	2.6	30%	2B	1.0	2000 x 1000
2	3.5	30%	2B	1.0	2000 x 1000
2	3.5	30%	2B	1.0	2000 x 1000
3	5	33%	2B	1.0	2000 x 1000
4	5.6	46%	2B	1.0	2000 x 1000
5	8	35%	2B	1.0	2000 x 1000
6	8	51%	2B	1.0	2000 x 1000
8	10	58%	2B	1,0	2000 x 1000

UNS S41000 Stainless Steel Diamond Sheet Size Chart

Thick. (in)	Thick. (mm)	Max Width (in)	Max Width (mm)	Wght (Lbs per Feet)	Wght (Kilos per m2)
0.187	4.7498	24	609.6	7.5398	36.8168
0.165	4.191	24	609.6	6.6528	32.4856
0.125	3.175	24	609.6	5.04	24.6103
0.105	2.667	24	609.6	4.2336	20.6727
0.09	2.286	24	609.6	3.6288	17.7194
0.062	1.5748	24	609.6	2.4998	12.2065
0.059	1.4986	24	609.6	2.3789	11.6162
0.055	1.397	24	609.6	2.2176	10.8285
0.05	1.27	24	609.6	2.016	9.8441
0.045	1.143	24	609.6	1.8144	8.8597
0.042	1.0668	24	609.6	1.6934	8.2689
0.04	1.016	24	609.6	1.6128	7.8753
0.035	0.889	24	609.6	1.4112	6.8909
0.032	0.8128	24	609.6	1.2902	6.3
0.03	0.762	24	609.6	1.2096	5.9065
0.025	0.635	24	609.6	1.008	4.9221
0.022	0.5588	24	609.6	0.887	4.3312
0.02	0.508	24	609.6	0.8064	3.9377
0.018	0.4572	24	609.6	0.7258	3.5441
0.016	0.4064	24	609.6	0.6451	3.15
0.015	0.381	24	609.6	0.6048	2.9532
0.014	0.3556	24	609.6	0.5645	2.7565
0.012	0.3048	24	609.6	0.4838	2.3624
0.01	0.254	24	609.6	0.4032	1.9688
0.008	0.2032	12	304.8	0.3226	1.5753
0.006	0.1524	12	304.8	0.2419	1.1812
0.005	0.127	12	304.8	0.2016	0.9844