CALL US

+(91) 022 66310022

Stainless Steel Plate

ASTM A240 Sheet and Stainless Steel Shims supplier in Mumbai, India

Stainless steel is a common material used to manufacture rods, bars, pipes, and plates. The 2mm stainless steel sheet is one such product that is 6 mm in thickness and 4m in length usually. They are available in bright polished, dull polished, and bright annealed. It provides improved environmental performance and reduced safety concerns. 2B Finish Stainless Steel Sheet is produced by cold rolling, heat treating, and pickling along with light rolling in the end. This light rolling gives it a smooth and reflective shine. Common stainless steel grades like 304, 304L, 201 of Stainless steel spring shim are made up of 2B finish.

Stainless Steel Plate

Perforated Stainless steel sheet

Stainless steel clad plate

18-8 Stainless steel slotted shim Manufacturer in India, Check Stainless steel roll sheet finishes chart

Stainless steel clad plate suppliers recommend these plates as they provide good strength and excellent heat and corrosion resistance in harsh conditions. Apart from this, they are also economical. Cold Rolled Stainless Steel Sheet uses corrosion-resistant alloy and has BPVC rated material used in it. These sheets with aluminum core are used for heat transfer and cooking. They are produced by roll bond technologies that combine 2 or more metals into a single sheet or plate. Stainless Steel Plate Manufacturers in India advise these due to the lightweight cost efficiency and thermal and electrical conductivity. 

Precision brand stainless steel slotted shim is widely used in motors to adjust the height of the motor itself. Moreover, they can also be used in turbines, blowers, fans, and compressors. The hot rolled stainless steel plate can be produced in large quantities as compared to the cold rolled ones, and hence are available in the market in abundance. They can use a larger amount of deformation rolling and can reduce metal crack defects. This improves the rate of finished metals. 1/4 perforated stainless steel plate that is hot rolled is said to have high plasticity and less distortion resistance.

Stainless Steel Plate

View Stainless steel flat sheet Size Chart, Get Stainless steel plate rolling gauge chart

Specification List of Stainless Steel Plate

ASTM Specification ASTM A240 / ASME SA240
Temper Annealed
Condition Polished on both sides
Width 10-2500mm
Hardness Half Hard, Hard, Soft, Quarter Hard, Spring Hard etc.
Finish Types Cold rolled, BA NO(8), Hot rolled, SATIN, 2B, 2D
Length & Sizes 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500mm x 3000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000mm x 4000mm to 6000mm, 2000 mm x 4000 mm, 2m, 2.44m, 3m, 1000 mm x 2000 mm, 1250mm x 2500mm, 36" X 120" or 48" X 144", 4' x 8', Cut to size available
Check our ready stock in Caracas, Tehran, Courbevoie, Thiruvananthapuram, Dammam, Calgary, Santiago, Bogota, Mumbai, Melbourne, Indore, Hyderabad, Kanpur, Lagos, Noida, Bangalore, Karachi, Ankara, Chennai, Rajkot, Port-of-Spain, Ahmedabad, Tau, Montreal, Bengaluru, Nagpur, Sydney, Gurgaon, Mexico, New Delhi, Riyadh, Ludhiana, Howrah, London, India, Baroda, Abu Dhabi, Gujarat, Khobar, Manama, Ahvaz, Istanbul, Muscat, Coimbatore, Ernakulam, Pimpri-Chinchwad, Perth, Gimhae-si, Surat, Kolkata, Ludhiana, Kuwait, Jamshedpur, Ranchi, Vadodara, Janeiro
Thickness 0.1 to 100 millimetre Thk
Stock in form of tread plate, Shim Stock, Plate, Sheet, Foils, hot rolled, Rolls, Plain Sheet, Rolling Sheet, Flat Sheet, Rolling Plate, Shim Sheet, Strip, cold rolled, annealed, Flats, Clad Plate, soft annealed, descaled, sheared, Flat Shim, Blank (Circle), Checker Plate
Dealers & Distributor of TISCO, LISCO, ESSAR, JINDAL, SAIL, TATA, BHUSHAN, JISCO, INDIAN, POSCO, BAOSTEEL IMPORTED material
Value Added Service Cutting, Bending, Heat Treatment, Annealed, Cladding, Pickling, Forging, Polish, Rolling, Minor Fabrication Etc.

Stainless Steel Plate Surface Finish

Chemical Structure of Stainless steel sheet

Grade Carbon Manganese Silicon Phosphorus Sulfur Chromium Molybdenum Nickel Nitrogen Titanium Iron
304 min. 18.0 8.0
max. 0.08 2.0 0.75 0.045 0.030 20.0 10.5 0.10
304L min. 18.0 8.0
max. 0.030 2.0 0.75 0.045 0.030 20.0 12.0 0.10
304H min. 0.04 18.0 8.0
max. 0.010 2.0 0.75 0.045 0.030 20.0 10.5
SS 310 0.015 max 2 max 0.015 max 0.020 max 0.015 max 24.00 26.00 0.10 max 19.00 21.00 54.7 min
316 min. 16.0 2.03.0 10.0  
max. 0.035 2.0 0.75 0.045 0.030 18.0 14.0  
316L min. 16.0 2.03.0 10.0    
max. 0.035 2.0 0.75 0.045 0.030 18.0 14.0  
316TI 0.08 max 10.00 14.00 2.0 max 0.045 max 0.030 max 16.00 18.00 0.75 max 2.00 3.00
317 0.08 max 2 max 1 max 0.045 max 0.030 max 18.00 20.00 3.00 4.00 57.845 min
SS 317L 0.035 max 2.0 max 1.0 max 0.045 max 0.030 max 18.00 20.00 3.00 4.00 11.00 15.00 57.89 min
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 19.00 9.00 12.00 0.10 max 5(C+N) 0.70 max
SS 321H 0.04 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 19.00 9.00 12.00 0.10 max 4(C+N) 0.70 max
347/ 347H 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 20.00 9.0013.00
410 min. 11.5
max. 0.15 1.0 1.00 0.040 0.030 13.5 0.75
446 min. 23.0 0.10
max. 0.2 1.5 0.75 0.040 0.030 30.0 0.50 0.25
904L min. 19.0 4.00 23.00 0.10
max. 0.20 2.00 1.00 0.045 0.035 23.0 5.00 28.00 0.25
We Keep Precision Brand Stainless steel flat shim stock, 3mm Stainless steel perforated plate Sizes for sale

Mechanical Analysis of Stainless steel clad plate

Grade Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
304/ 304L 8.0 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
304H 8.0 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 40 %
310 / 310S / 310H 7.9 g/cm3 1402 °C (2555 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 40 %
306/ 316H 8.0 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
316L 8.0 g/cm3 1399 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
317 7.9 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
321 8.0 g/cm3 1457 °C (2650 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
347 8.0 g/cm3 1454 °C (2650 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
904L 7.95 g/cm3 1350 °C (2460 °F) Psi 71000 , MPa 490 Psi 32000 , MPa 220 35 %

SS flat sheet Material Equivalent

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304 1.4301 S30400 SUS 304 304S31 08Х18Н10 Z7CN18‐09 X5CrNi18-10
SS 304L 1.4306 / 1.4307 S30403 SUS 304L 3304S11 03Х18Н11 Z3CN18‐10 X2CrNi18-9 / X2CrNi19-11
SS 304H 1.4301 S30409
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 X8CrNi25-21
SS 310H S31009
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316H 1.4401 S31609
SS 316Ti 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2
SS 317 1.4449 S31700 SUS 317
SS 317L 1.4438 S31703 SUS 317L X2CrNiMo18-15-4
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9
SS 347 1.4550 S34700 SUS 347 08Ch18N12B X6CrNiNb18-10
SS 347H 1.4961 S34709 SUS 347H X6CrNiNb18-12
SS 904L 1.4539 N08904 SUS 904L 904S13 STS 317J5L Z2 NCDU 25-20 X1NiCrMoCu25-20-5

Sizes of Hot rolled stainless steel plate

SIZE SIZE (millimeter)
.125" 3.18
.134" 3.40
.156" 3.96
.187" 4.75
.250" 6.35
.312" 7.92
.375" 9.53
.500" 12.7
.625" 15.9
.750" 19.1
.875" 22.2
1" 25.4
1.125" 28.6
1.250" 31.8
1.500" 38.1
1.750" 44.5
2" 50.8
2.500" 63.5
3" 76.2
We offer Stainless steel Polished Plate in checker/ diamond Plate, Check Stainless steel hot rolled plate tolerances, Ready Stainless steel cold rolled plates in Soft Hardness

Stainless Steel Sheet Dimensions

Metric Dimensions

Surface finish Thickness (mm) Width (mm)
2B – heat treated, pickled, Cold rolled, skin passed 0.25–8.0 max. 2032
2D – heat treated, pickled, Cold rolled 0.4–6.35 max. 1524
2E – heat treated, mechanically descaled, Cold rolled 0.4–8.0 max. 2032
2R – Cold rolled, bright annealed 0.25–3.5 max. 1524
2H – Work hardened 0.4–6.35 max. 1524
Polished, brushed 0.5–4.0 max. 1524

Imperial Dimensions

Surface finish Gauge (in) Width (in)
2B – heat treated, pickled, Cold rolled, skin passed 10–24 max. 72*
2D – heat treated, pickled, Cold rolled 12–24 max. 60
BA Mexinox only 18–28 max. 48
Polished (not brushed) 11–24 max. 60
Temper rolled Mexinox only 13–29 max. 48

Various Types of Stainless Steel Plate Suppliers in India

2mm stainless steel sheet

2mm stainless steel sheet

Precision brand stainless steel slotted shim

Precision brand stainless steel slotted shim

1/4 perforated stainless steel plate

1/4 perforated stainless steel plate

Hot rolled stainless steel plate

Hot rolled stainless steel plate

Cold Rolled Stainless Steel Sheet

Cold Rolled Stainless Steel Sheet

Stainless steel spring shim

Stainless steel spring shim

2B Finish Stainless Steel Sheet

2B Finish Stainless Steel Sheet

Stainless steel flat sheet

Stainless steel flat sheet

Stainless steel Polished Plate

Stainless steel Polished Plate

SS Checker Plate

SS Checker Plate

Stainless Steel Induction Plate

Stainless Steel Induction Plate

Bright Annealed Stainless Steel Sheet

Bright Annealed Stainless Steel Sheet

Stainless Steel Hot rolled Plate Size Chart

CPP Plate 1D Finish ASTM A240, ASME SA240: 304L, 316L, 304, 316
EN 10088-2: 1.4307, 1.4404, 1.4301, 1.4401

Size
(millimeter)
Wght per
plate (kg)
Size
(millimeter)
Wght per
plate (kg)
2000 x 1000 x 3.0 51.0 4000 x 2000 x 6.0 408.0
2500 x 1250 x 3.0 79.7 2500 x 1250 x 8.0 213.0
3000 x 1500 x 3.0 115.0 3000 x 1500 x 8.0 306.0
2000 x 1000 x 4.0 68.0 4000 x 2000 x 8.0 544.0
2500 x 1250 x 4.0 106.0 2500 x 1250 x 10.0 266.0
3000 x 1500 x 4.0 153.0 3000 x 1500 x 10.0 383.0
2000 x 1000 x 5.0 85.0 4000 x 1500 x 10.0 510.0
2500 x 1250 x 5.0 133.0 4000 x 2000 x 10.0 680.0
3000 x 1500 x 5.0 191.0 2500 x 1250 x 12.0 319.0
4000 x 2000 x 5.0 340.0 3000 x 1500 x 12.0 459.0
2000 x 1000 x 6.0 102.0 4000 x 1500 x 12.0 612.0
2500 x 1250 x 6.0 159.0 4000 x 2000 x 12.0 816.0
3000 x 1500 x 6.0 230.0    

Comparison with Other Stainless Steel Families

Table 1 (Part A):

Alloy Group Hardenable Work Hardening Rate Magnetic Response1 Corrosion Resistance2
Martensitic Quench & Temper Medium Yes Medium
Ferritic No Medium Yes Medium
Precipitation Hardening Age Harden Medium Yes Medium
Austenitic By Cold Work Very High Generally No High
Duplex No Medium Yes Very High

Table 1 (Part B):

Alloy Group Weldability High Temperature Resistance Ductility Low Temperature Resistance3
Martensitic Low Low Low Low
Ferritic Low High Medium Low
Precipitation Hardening High Low Medium Low
Austenitic Very High Very High Very High Very High
Duplex High Low Medium Medium

Stainless Steel Tread Plate Thickness chart

Thickness on base (mm) Unit Wght / plate (kg)
3000 x1000 x3.0 78.0
3000 x1250 x4.5 143.0
3000 x1250 x6.0 180.0
3000 x1250 x8.0 210.0

SS Chequered Plate Weight Chart

Plate Thick.
(inch and mm)
Plate Sizes Sheet Wght / Unit Area
(lbs/ft² and kg/m²)
Estimated Wght / Sheet
(lbs and kg)
0.015 , 0.381 36 x 96 0.630 , 3.07566 15.12 , 6.84936
0.015 , 0.381 36 x 120 0.630 , 3.07566 18.90 , 8.5617
0.0178 , 0.45212 36 x 96 0.756 , 3.690792 18.15 , 8.22195
0.0178 , 0.45212 36 x 120 0.756 , 3.690792 22.68 , 10.27404
0.0178 , 0.45212 48 x 96 0.756 , 3.690792 24.19 , 10.95807
0.0178 , 0.45212 48 x 120 0.756 , 3.690792 30.24 , 13.69872
0.0235 , 0.5969 30 x 96 1.008 , 4.921056 20.16 , 9.13248
0.0235 , 0.5969 30 x 120 1.008 , 4.921056 25.20 , 11.4156
0.0235 , 0.5969 36 x 96 1.008 , 4.921056 24.19 , 10.95807
0.0235 , 0.5969 36 x 120 1.008 , 4.921056 30.24 , 13.69872
0.0235 , 0.5969 36 x 144 1.008 , 4.921056 36.29 , 16.43937
0.0235 , 0.5969 48 x 96 1.008 , 4.921056 32.26 , 14.61378
0.0235 , 0.5969 48 x 120 1.008 , 4.921056 40.32 , 18.26496
0.0235 , 0.5969 48 x 144 1.008 , 4.921056 48.39 , 21.92067
0.0291 , 0.73914 30 x 96 1.260 , 6.15132 25.20 , 11.4156
0.0291 , 0.73914 30 x 120 1.260 , 6.15132 31.50 , 14.2695
0.0291 , 0.73914 36 x 96 1.260 , 6.15132 30.24 , 13.69872
0.0291 , 0.73914 36 x 120 1.260 , 6.15132 37.80 , 17.1234
0.0291 , 0.73914 36 x 144 1.260 , 6.15132 45.37 , 20.55261
0.0291 , 0.73914 48 x 96 1.260 , 6.15132 40.32 , 18.26496
0.0291 , 0.73914 48 x 120 1.260 , 6.15132 50.41 , 22.83573
0.0291 , 0.73914 48 x 144 1.260 , 6.15132 60.49 , 27.40197
0.0355 , 0.9017 30 x 96 1.512 , 7.381584 30.24 , 13.69872
0.0355 , 0.9017 30 x 120 1.512 , 7.381584 37.80 , 17.1234
0.0355 , 0.9017 36 x 96 1.512 , 7.381584 36.29 , 16.43937

Stainless Steel Cold Rolled Plates Weight Chart

Size (millimeter) Wght per
plate (Kilogram)
Size(millimeter) Wght per
plate (Kilogram)
4000 x 2000 x 2.0 136.0 3000 x 1500 x 5.0 191.0
4000 x 2000 x 3.0 204.0 4000 x 2000 x 5.0 340.0
2500 x 1250 x 4.0 106.0 2500 x 1250 x 6.0 159.0
3000 x 1500 x 4.0 153.0 3000 x 1500 x 6.0 230.0
4000 x 2000 x 4.0 272.0 4000 x 2000 x 6.0 408.0
2500 x 1250 x 5.0 133.0    

HS Code of SS Sheet Metal

HS Code Description
72192219 Hot Rolled (Having >8%) 5 X 1240 X 6000 millimeter
72192219 Hot Rolled (Having >8%) 6 X 1500 X 6000 millimeter
72192212 Hot Rolled (Having >8%) 6.00 X 1500 X 6000 millimeter-310S/NO1
72192219 Hot Rolled (Having >8%) 6 X 1240 X 6000 millimetre
72192390 Hot Rolled (Having >8%) 4 X 1240 X 6000 millimetre
72192212 Hot Rolled (Having >8%) 8.00 X 1500 X 6000 millimetre-310
72192390 Hot Rolled (Having >8%) 3 X 1240 X 6000 millimetre

Stainless Steel Perforated Sheet Cut To Size

Hole Diam. (in mm) Hole Centres (in mm) O/A Finish Tck mm Full Sheet Size mm
0.75 1.5 23% 2B 0.6 2000 x 1000
1 2 23% 2B 1.0 2000 x 1000
1.5 2.6 30% 2B 1.0 2000 x 1000
2 3.5 30% 2B 1.0 2000 x 1000
2 3.5 30% 2B 1.0 2000 x 1000
3 5 33% 2B 1.0 2000 x 1000
4 5.6 46% 2B 1.0 2000 x 1000
5 8 35% 2B 1.0 2000 x 1000
6 8 51% 2B 1.0 2000 x 1000
8 10 58% 2B 1,0 2000 x 1000

Stainless Steel Sheet Gauge Tolerance

Gauge LB/Sq In. LB/Sq. Ft. Gauge Tolerance
96″ Wide 72″ Wide
3/8 0.03750 0.011456 16.0496 +.0060″ -.0010″ +.0055″ -.0010″
7/16 0.04375 0.013250 19.0080
1/2 0.05000 0.015044 21.0633
9/16 0.05625 0.016838 24.0247
5/8 0.06250 0.018633 26.0831
11/16 0.06875 0.020427 29.0415
3/16 0.01875 0.005958 8.0579 +.0050″ -.0010″ +.0045″ -.0010″
7/32 0.02187 0.006854 9.0870
1/4 0.02500 0.007750 11.0162
5/16 0.03125 0.009546 13.0746
1 1.00000 0.029628 42.0665 +.0075 -.0010″ +.0070″ -.0010″
1-1/8 1.01250 0.033217 47.0833
1-1/4 1.02500 0.036806 53.0001
1-3/8 1.03750 0.040395 58.0169
1-1/2 1.05000 0.043984 63.0337
1-3/4 1.07500 0.051161 73.0672
3/4 0.07500 0.022308 32.0123 +.0065″ -.0010″ +.0060″ -.0010″
13/16 0.08125 0.024102 34.0707
7/8 0.08750 0.025897 37.0291
15/16 0.09375 0.027691 39.0875
3 3.00000 0.087709 126.0301 +.0160″ -.0010″  
3-1/2 3.05000 1.002064 146.0972
2 2.00000 0.058339 84.0008 +.0150″ -.0010″ +.0125″ -.0010″
2-1/8 2.01250 0.062229 89.0610
2-1/4 2.02500 0.065817 94.0777
2-1/2 2.05000 0.072995 105.0113
2-3/4 2.07500 0.080173 115.0449
4 4.00000 1.016850 168.0264 +.0200″ -.0010  

Stainless Steel Sheet Roll Price in India

Product Price
Cold Rolled Stainless Steel Sheets (Aisi443) No.4 Trim Edged Size: 1.5 X 1220 X 2130mm $1.47/ Kilogram
Plates - SA 240 Size In mm:- 7,850 X 3,070 X 60.00 [hot Rolled Stainless Steel Plate $2.57/ Kilogram
Hot Rolled Stainless Steel Wide Plates (Having >8%) 12x1500x6000mm $0.97/ Kilogram
Plates - SA 240 Size In Mm:- 6,730 X 2,520 X 14.00 [hot Rolled Stainless Steel Plate $2.27/ Kilogram

Many Stainless Steel Shims suppliers, exporters, retailers, dealers, distributors, stockists, wholesalers, stockholders, and importers find your sizes in our stock of SS Tread Plate in Mumbai, Choose us for the best price of SS Metal Sheet in India, Contact for a Quick Quote!

Suppliers of SS Diamond Plate with Value Added Services

  • Polishing
  • UT Testing
  • Annealing & Heatreating
  • Grinding
  • PMI (Positive Material Identification)
  • Beveling

Thickness Table of SS Rolling Plate

Thick. (in millimetre)
0.0005, Temper: As rolled 0.02, Temper: Half hard
0.0004, Temper: As rolled 0.02, Temper: Annealed
0.00076, Temper: As rolled 0.025, Temper: Half hard
0.00065, Temper: As rolled 0.025, Temper: Annealed
0.001, Temper: As rolled 0.030, Plate width: 15.05, Temper: Half hard
0.002, Temper: Half hard 0.05, Temper: Half hard
0.002, Temper: As rolled 0.038, Temper: Annealed
0.0025, Temper: As rolled 1.00, Temper: Annealed
0.0025, Temper: As rolled, Condition: Surface oxide 0.075, Temper: Half hard
0.0125, Temper: Half hard 0.015, Plate width: 0.03, Temper: Half hard
0.005, Temper: Quarter hard 2.00, Temper: Half hard
0.005, Temper: Half hard 2.00, Temper: 1/4 Hard
0.01, Temper: Half hard 3.00, Temper: 1/4 Hard
0.0075, Temper: Half hard 3.00, Temper: Annealed
0.01, Plate width: 10, Temper: Half hard 6.035, Temper: Hard
0.015, Temper: Half hard  

Stainless Steel Plate Flatness Tolerance Chart

Particular Thick. (t), in. (mm) Flatness Tolerance for Thick. Given, in. (mm)
1/4 <= t < 3/8 (9.052) 3/8 (9.05)
t < 1/4 (6.035) 7/16 (11)
t >=4 (101.060) 1/4 (6.04)
1/2 (12.070) <= t < 3/4 (19.005) 5/16 (7.09)
3/8 (9.052) <= t < 1/2 (12.070) 5/16 (7.09)
1 (25.040) <= t < 1-1/2 (38.010) 1/4 (6.04)
3/4 (19.005) <= t < 1 (25.040) 5/16 (7.09)
1 1/2 (38.010) < = t < 4 (101.060) 1/4 (6.04)

Stainless Steel Sheet Finish 2b Standard Sizes

Size (in Inch.) Size (in millimeter)
.0875" .0125" 22.02 3.018
1" .0134" 25.04 3.040
1.0125" .0156" 28.06 3.096
1.0250" .0187" 31.08 4.075
1.0500" .0250" 38.01 6.035
1.0750" .0312" 44.05 7.092
2" .0375" 50.08 9.053
2.0500" .0500" 63.05 12.07
3" .0625" 76.02 15.09
  .0750"   19.01

Stainless Steel Mirror Finish Sheet Gauge Chart

Gauge
Number
Millimetre Inches
8 4.0365 .017187
9 3.0968 .015625
10 3.0571 .014062
11 3.0175 .0125
12 2.0778 .010937
14 1.0984 .007812
16 1.0587 .00625
18 1.0270 .0050
20 .09525 .00375
22 .07937 .003125
24 .0635 .0025
26 .0476 .001875
28 .0396 .001562
30 .03175 .00125

SS Plate Sheets Processing

SS Plate Sheets Processing

In Below Places We Provide Fastest Delivery

ASTM A240 Structural Steel Plate, Stainless Steel, 20 X 1220 X 2440 mm Malaysia, Colombia, China, Rajkot, Vadodara, Sweden
ASTM A240 Stainless Steel Plate, 4 X 8 Inch South Korea, Gurgaon, NY 12203 (USA), Singapore, Malaysia
Stainless Steel Hot Rolled Plate, Thickness: 3 to 4 mm Japan, Chandigarh, Romania, Malaysia, Faridabad, Europe
ASTM A240 Stainless Steel Plate, 1500 MM x 2400 MM x 6 MM Kuwait, Ahmedabad, Brazil, South Africa, Saudi Arabia (KSA)
Stainless Steel Plate, 1500mm X 6000mm X 19mm UK, Nagpur, Mexico, Lucknow, Spain, Nashik, Egypt
4mm 6mm 8mm 10mm thick 4x8 Stainless Steel Corrugated Sheet Singapore, Pakistan, Bahrain, Agra, South Africa, Kolkata
19.05mm, A240 Stainless Plate, 6 x 12 Inch Netherlands, Dubai, Kochi, Malaysia, Russia, Dehradun
ASTM A240 Stainless Steel Plate, Sheet Metal, 1800 x 2400 x 8 MM Thailand, Sikandrabad, Bengaluru, France, Europe, Qatar
WT 3/8in, ASTM A240 Stainless Steel Checkered Plate, W 4Ft, L 8Ft Mumbai, Philippines, Indonesia, Noida, Belgium, Dammam -KSA
Stainless Hot Rolled Plate, 4mm×1200mm×4800mm, JIS G3101 Philippines, Los Alamos -Mexico, Malaysia, Bhuneshwar, Taiwan
4X8 Circle 0.6Mm Thick for Stainless Steel Plate Germany, Thailand, Malaysia, Thiruvananthapuram, Chennai, Czechia
SS Checkered plate, 5 X 1500 X 6000mm, 5/7 DIN 59220-T-5 Chile, Delhi, Bhopal, Iran, Visakhapatnam, Singapore, Italy
I BEAM Steel Plate, ASTM A240, 200 X 150MM, 9M Malaysia, Coimbatore, United Arab Emirates (UAE), Turkey, Norway
4x8 Stainless Steel Sheet Mirror Flat Bangladesh, USA, Malaysia, Surat, Finland, Pune
2-1/2 Inch, SS Plate, 48 Inch x 48 Inch Philippines, Ludhiana, Malaysia, Canada, Singapore, Jaipur
ASTM A240 SS Plate, LG 2400mm, WT 60mm Oman, Hong Kong, UAE, Malaysia, Ahmedabad, Patna
Size: 1250mm X2500mm, Stainless Steel Plate, Thickness: 2 - 8mm Malaysia, Europe, United Kingdom -UK, Indore, UAE
A240 Checkered Plate, 3/8 inch X 8 feet X 4 feet Hyderabad, Australia, UK, Philippines, Nigeria, France, Thane
Stainless Steel Sheet, 2B Finished, THK 4 mm Poland, Mumbai, Navi Canada, Ellington -United States, UK

 

 

Top